Device Configuration - Image Tab IntraVUE™ 3

This tab allows you to assign an image of your choice from the available list of plant automation network devices included in the IntraVUE™ install.

Simply click on an image and select "Save Changes" to apply the image to the specific node. The image you assign will be permanent until you decide to replace this with another image, or remove the any image completely by clicking on the 'x' symbol.

IntraVUE™ auto discovery does not add an image to a device automatically. This is a common misconception of the auto-discovery process for both SNMP-enabled devices and non-SNMP enabled devices.

To assign a new image to a device simply click on any image and click "Save Changes". To remove the assigned image from the device simply click on the 'x' and click "Save Changes" to apply the change. See to find the location of the images.