IntraVUE 3 Filters

 

IntraVUE™ 3 provides a granular topology view based on one or more of the following filters.

Some filters may require devices to be previously configure for the specific filter to work. See additional details.

- Critical Status (device most already be configured with this setting). See Setting Critical States

-Non-Admin Verified. See Admin Verification in IntraVUE 3

-Switches

-Wireless Access Point (WAP). See Wireless Access Points

-Ghost Nodes. See Admin Verification in IntraVUE 3

-Disconnected Nodes

-Threshold Issue. Bandwidth send / receive or Ping failure / response time

 

IntraVUE™ can also allow you to add granularity to the current topology view by filtering by enabling only one or multiple specific networks from the "Available Scanned Networks" section in Filters.

 

You can combine both filter options and available scanned networks filters to make it easy to diagnose, document, or analyze your network.