You are here:

Device Configure - Other Names Tab IntraVUE™ 3

You can assign a other names to a device.

The IP address name is set when a device is initially discovered and it can not be changed, even the 'n/a' nodes.

If Model name is auto-detected by SNMP or configured, the IP address will only be displayed.

NOTE

You can have IGNORE SNMP BRIDGE MIB DATAchecked and the scanner will not attempt to use SNMP to get a device's Device Model, Vendor, and/or Revision field. SEE Device Configuration - SNMP Tab

This is important for some devices which respond to SNMP but do not have a Device Model, Vendor, and/or Revision field configured.

Enter the value you want to use instead of what the device reports from SNMP.

	Download IntraVUE 3.0.2, Tools, Guides, Checklists \| See Downloads
	IntraVUE On-Demand Analytics Reports \| Click here
	IntraVUE 3.0.2 Release Notes \| https://pages.panduit.com/IntraVUE_Release_Notes.html
	IntraVUE Resources \| http://www.panduit.com/en/intravue/resources
	IntraVUE Subscriptions \| http://www.panduit.com/en/intravue/offering
	IntraVUE Request a Demo \| http://www.panduit.com/en/intravue/demo
	IntraVUE Solutions Knowledge Base \| http://panweb2.custhelp.com/
	IntraVUE 3 Videos \| IntraVUE Videos in YouTube